Mat 540 week 8 homework chapter 4

MAT540 Week 8 Homework Chapter 4

Don't use plagiarized sources. Get Your Custom Essay on
Mat 540 week 8 homework chapter 4
Just from $13/Page
Order Essay


14.   Grafton Metal works Company produces metal alloys from six different ores it mines.  The company has an order from a customer to produce an alloy that contains four metals according to the following specifications:  at least 21% of metal A, no more than 12% of metal B, no more than 7% of metal C and between 30% and 65% of metal D.  The proportion of the four metals in each of the six ores and the level of impurities in each ore are provided in the following table:


When the metals are processed and refined, the impurities are removed. 

The company wants to know the amount of each ore to use per ton of the alloy that will minimize the cost per ton of the alloy.

a.        Formulate a linear programming model for this problem. 

b.      Solve the model by using the computer. 


19.   As a result of a recently passed bill, a congressman’s district has been allocated $4 million for programs and projects.  It is up to the congressman to decide how to distribute the money.  The congressman has decided to allocate the money to four ongoing programs because of their importance to his district – a job training program, a parks project, a sanitation project, and a mobile library.  However, the congressman wants to distribute the money in a manner that will please the most voters, or, in other words, gain him the most votes in the upcoming election.  His staff’s estimates of the number of votes gained per dollar spent for the various programs are as follows.


In order also to satisfy several local influential citizens who financed his election, he is obligated to observe the following guidelines:

·         None of the programs can receive more than 40% of the total allocation.

·         The amount allocated to parks cannot exceed the total allocated to both the sanitation  project and the mobile library

·         The amount allocated to job training must at least equal the amount spent on the sanitation project. 

Any money not spent in the district will be returned to the government; therefore, the congressman wants to spend it all.  The congressman wants to know the amount to allocate to each program to maximize his votes. 

a.       Formulate a linear programming model for this problem.

b.      Solve the model by using the computer.


20.   Anna Broderick is the dietician for the State University football team, and she is attempting to determine a nutritious lunch menu for the team.  She has set the following nutritional guidelines for each lunch serving:

·         Between 1,500 and 2,000 calories

·         At least 5 mg of iron

·         At least 20 but no more than 60 g of fat

·         At least 30 g of protein

·         At least 40 g of carbohydrates

·         No more than 30 mg of cholesterol

She selects the menu from seven basic food items, as follows, with the nutritional contributions per pound and the cost as given: 


The dietician wants to select a menu to meet the nutritional guidelines while minimizing the total cost per serving.

a.       Formulate a linear programming model for this problem.

b.      Solve the model by using the computer

c.       If a serving of each of the food items (other than milk) was limited to no more than a half pound, what effect would this have on the solution?


22.   The Cabin Creek Coal (CCC) Company operates three mines in Kentucky and West Virginia, and it supplies coal to four utility power plants along the East Coast.  The cost of shipping coal from each mine to each plant, the capacity at each of the three mines and the demand at each plant are shown in the following table:


The cost of mining and processing coal is $62 per ton at mine 1,  $67 per ton at mine 2, and  $75 per ton at mine 3.  The percentage of ash and sulfur content per ton of coal at each mine is as follows:


 Each plant has different cleaning equipment.  Plant 1 requires that the coal it receives have no more than 6% ash and 5% sulfur; plant 2 coal can have no more than 5% ash and sulfur combined; plant 3 can have no more than 5% ash and 7% sulfur; and plant 4 can have no more than 6% ash and sulfur combined.    CCC wabts to determine the amount of coal to produce at each mine and ship to its customers that will minimize its total cost. 


a.       Formulate a linear programming model for this problem.

b.      Solve this model by using the computer.


 36.   Joe Henderson runs a small metal parts shop. The shop contains three machines – a drill press, a lathe, and a grinder.   Joe has three operators, each certified to work on all three machines.  However, each operator performs better on some machines than on others.  The shop has contracted to do a big job that requires all three machines.  The times required by the various operators to perform the required operations on each machine are summarized as follows: 

 Joe Henderson wants to assign one operator to each machine so that the topal operating time for all three operators is minimized.

a.       Formulate a linear programming model for this problem. 

b.      Solve the model by using the computer

c.       Joe’s brother, Fred, has asked him to hire his wife, Kelly, who is a machine operator.  Kelly can perform each of the three required machine operations in 20 minutes.  Should Joe hire his sister-in-law? 


43.   The Cash and Carry Building Supply Company has received the following order for boards in three lengths:


Order (quantity)

7 ft.


9 ft.


10 ft.



The company has 25-foot standard-length boards in stock.  Therefore, the standard-length boards must be cut into the lengths necessary to meet order requirements.  Naturally, the company wishes to minimize the number of standard-length boards used. 


a.       Formulate a linear programming model for this problem. 

b.      Solve the model by using the computer

c.       When a board is cut in a specific pattern, the amount of board left over is referred to as “trim-loss.” Reformulate the linear programming model for this problem, assuming that the objective is to minimize trim loss rather than to minimize the total number of boards used, and solve the model.  How does this affect the solution? 

Order a unique copy of this paper
(550 words)

Approximate price: $22

Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our Guarantees

At, we value all our customers, and for that, always strive to ensure that we deliver the best top-quality content that we can. All the processes, from writing, formatting, editing, and submission is 100% original and detail-oriented. With us, you are, therefore, always guaranteed quality work by certified and experienced writing professionals. We take pride in the university homework help services that we provide our customers.

Money-Back Guarantee

As the best homework help service in the world, 111 Papers ensures that all customers are completely satisfied with the finished product before disbursing payment. You are not obligated to pay for the final product if you aren’t 100% satisfied with the paper. We also provide a money-back guarantee if you don’t feel that your paper was written to your satisfaction. This guarantee is totally transparent and follows all the terms and conditions set by the company.

Read more

Zero-Plagiarism Guarantee

All products that we deliver are guaranteed to be 100% original. We check for unoriginality on all orders delivered by our writers using the most advanced anti-plagiarism programs in the market. We, therefore, guarantee that all products that we submit to you are 100% original. We have a zero-tolerance policy for copied content. Thanks to our strict no plagiarized work rule, you can submit your homework to your professor without worrying.

Read more

Free-Revision Policy

TThis is one of the most cherished courtesy services that we provide to help ensure that our customers are completely satisfied with our finished products. Delivering the best final product to our customers takes multiple inputs. prides itself on delivering the best university homework help services in the writing industry. And, in part, our free revision policy is how we do it. What’s more, all our revisions are 100% free without any strings attached.

Read more

Privacy Policy

Client privacy is important to use. We know and understand just how important customers value their privacy and always want to safeguard their personal information. Thus, all the information that you share with us will always remain in safe custody. We will never disclose your personal information to any third party or sell your details to anyone. 111 Papers uses the most sophisticated, top-of-the-line security programs to ensure that our customers’ information is safe and secured.

Read more

Fair-Cooperation Guarantee

Placing your order with us means that you agree with the homework help service we provide. We, in turn, will endear to ensure that we do everything we can to deliver the most comprehensive finished product as per your requirements. We will also count on your cooperation to help us deliver on this mandate. Yes, we also need you to ensure that you have the highest-quality paper.

Read more

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
The price is based on these factors:
Academic level
Number of pages